The Stealth Digi-Mig 200 LCD PFC is a Superb Multi Process Synergic Mig Welder and is perfect for maintenance departments, small engineering works, site work and the discerning DIY Welder.
Features Include:
> Synergic Mig Welding for the easiest possible Mig Welding Set Up (more info below)
> Conventional Mig Welding for those who prefer manual set up
> DC Lift Tig Welding (optonal Tig Torch Required)
> MMA Welding (optional MMA Welding Lead required)
The smooth Mig Welding output is a joy to use and with an low minimum output of 25amps, thin metal is no problem.
Swapping to Lift Tig is easy and the DC Tig process can be used to weld most metals except Aluminium alloys.
Swapping to MMA (Arc/Stick Welding), is also straightforward. The machine is really easy to stick weld with as it produces a super smooth DC arc and has Hot Start & Anti-Stick functions built in.
If you do a variety of work, often under time pressure and need a portable, versatile machine that's easy to use, TheStealth Digi-Mig 200 LCD PFC Multi Process Welder is a GREAT choice!
Supplied Complete With:
> 3M Euro Fit Torch
> Work Return (Earth) Lead
> Gas Input Hose
> Argon/Co2 Gas Regulaltor for Refillable Cylinder
> 5 Year SWP Machine Warranty
> FREE After Sales Support from our Technical Team.
Synergic Mig
Stealth Digi-Mig 200 LCD PFC has 16 Synergic Mig programs covering combinations of:
> 0.6, 0.8, 0.9 & 1.0mm Mig Welding Wires
> Fe-metals with Solid Wire (mild steel) & Co2 Gas
> Fe-metals with Solid Wire (mild steel) & Mixed Gas
> Fe-metals with Flux Cored Wire (mild steel) & Co2 Gas
> Fe-metals with Flux Cored Wire (mild steel) & Mixed Gas
> Stainless Steel with Solid Wire & Mixed Gas
> Aluminium with Solid Wire & Argon Gas
> Cu-Si3 with Solid Wire & Argon Gas
Once the appropriate program has been chosen, the power control can be turned until the thickness of metal being welded is shown on the screen and you're Ready to Weld. If neccessary, the program can be easily adjusted via the right hand control knob.
Although this welder will tolerate input voltage fluctuations of up to 10%, The Welders Warehouse does not recommend this unit be used off a generator except where the generator is fitted with a voltage regulation device.
You may find some of our Mig Welder Blog Articles useful.
You may find this Choosing a Mig Welder Video useful.
