Special, UK Design Engineered Multi Stage Oxygen Regulator with Low Pressure output of 0-2bar (29 psi).
Multi Stage Regulators are ideal where a stable output is required. However, most Multi Stage Oxygen Regulators have a 0-10bar (145 psi) output, making them poorly suited to Little Torches, Micro Torches and Model 'O' type Torches, or indeed any application that requires a very low pressure of Oxygen.
This Low Pressure Multi Stage Regulator combines stability with a 0-2bar output, making it ideal for micro/small flame applications, including Jewellery and Lead Welding.
Suitable for cylinders up to 300 bar pressure.
Input Thread is UK Standard 5/8"BSP.
Output Thread is UK Standard 3/8"BSP
Conforms to EN ISO 2503
Oxy/Acetylene Torches
Oxy/Propane/Propylene Torches
Oxy/Acetylene/Propane/Propylene Hoses
Tech Advisors Thoughts
A lot of Gas Cylinders are now side exit, this would infer you need a Side Entry Regulator. HOWEVER, whilst this is great for full size cylinders, which are around 146cm (5ft ish) tall, in my opinion, if you're using smaller cylinders 10 or 20 Litre for example, I would use a Bottom Entry Regulator such as the one on this page and have it lying on its back. This allows you to stand over the Regulator and read the gauges without the need to bend down!
