High Quality Regulator and Flowmeter combination, allows very precise adjustment of gas flow.
Ideal for Tig welding, useful for Mig.
Flowmeters are more accurate than regulator gauges and thus help reduce gas waste by ensuring you do not use more gas than you need.
Can be used with Top or Side Exit Cylinders. For Side Exit cylinders the Regulator will lay flat on its back with the Flowmeter vertical (see additional photo).
> Precision machined mostly Brass construction.
> Gauge showing Cylinder Contents Pressure
> Flow Meter shows Gas Delivery Flow Rate.
> 0-14 Litres Per Minute output is Ideal for Tig applications
> Suitable for cylinders up to 300 bar pressure
> Input Thread is UK Standard 5/8"BSP.
> Output Thread is UK Standard 3/8"BSP
> Conforms to EN ISO 2503
Tech Advisors Thoughts
A lot of Gas Cylinders are now side exit, this would infer you need a Side Entry Regulator. HOWEVER, whilst this is great for full size cylinders, which are around 146cm (5ft ish) tall, in my opinion, if you're using
smaller cylinders 10 or 20 Litre for example, I would use a Bottom Entry Regulator such as the one on this page and have it lying on its back. This allows you to stand over the Regulator and read the gauges without the need to bend down! You will still need to have the Flowmeter Tube verticle, but this is easy as it rotates around the fitting!
